2018 © Brett Productions Ltd

The 100 Watt and 60 Watt models are identical in all respects apart from wattage and labeling.
Operating voltage 230 - 240 volt 50 Hz A.C.
Auto-resetting 100 deg Celcius thermal cut off switch
Power consumption for 100 Watt model is 0.1 units per hour. Power consumption for 60 Watt model is 0.06 units per hour. Definition: 1 unit of electricity = 1000 watts or 1 kW for 1 hour expressed as kW-hr.
Dimensions 475mm long x 100mm Wide x 65mm Deep
Weight 1.5 kg
White power cord 1.8 m long with molded Australian / New Zealand plug.
Fabricated in steel and powder-coated in a durable cream colour.
Can be left running continuously.
Must be installed horizontally to a wall. Four screws (provided). A minimum clearance of  100mm  above and below the unit required for good air flow. Independently tested to comply with AS/ NZ electrical standards Approval # NSW 26582
Designed and Manufactured in New Zealand


Operating Voltage 230 - 240 Volt 50 Hz A.C.
Power consumption 0.017 units per hour
Definition: 1 unit of electricity = 1000 Watts or 1 kW for 1 hour
Dimensions 360 x 25 mm aluminium tube powder-coated in durable cream colour
Weight 389 grams
White power cord 1.8 meters long with molded Australian / New Zealand plug
Can be left running continuously
Must be mounted horizontally to a wall using the four screws provided
Two Year Warranty
Independently tested to comply with AS / NZ electrical standards Approval # NSW 26582
Designed and Manufactured in New Zealand
Model HY02TP
Plug-In Digital Thermostat / Timer
Model T17
Dampchaser® 17 Watt
Models B60 & B100
Dampchaser® 60 Watt & 100 Watt
and Cautionary notes
and Cautionary notes
Supplier Declaration of Conformity (SDoC)
Key Features:

1. As easy to operate as the previous Heatermate model in the Manual mode (comes as default) – “set and forget”.

2. Built-in simple Timer with ON/OFF times for each day – to be operated in Manual mode.

3. Built-in 7 days Timer with different SET temperatures for different times during the day and days of the week – to be operated in Automatic mode.

4. Larger display showing time, status, SET temperature, room temperature and other information.

5. Child lock.  Activated automatically after 10 minutes. Press and hold Down button for 3 seconds then release to deactivate.

6. Full 2400W power rating – suitable for any electric heater (the previous Heatermate model was up to 2300W).

7. Adjustable temperature sensor – customer is able to adjust Heatermate sensor reading to make it consistent with their other room thermometer or baby monitor.

8. Adjustable thermostat differential – customer can adjust by how much the room temperature should drop before the heater is switched back ON. This also will regulate how often the heater will come ON and OFF.

9. Comes with 2 years manufacturer’s warranty (the previous model had 1 year manufacturer’s warranty).

   Technical Specifications:

1. Operating voltage: 240V AC/ 50Hz;

2. Load (Max):     10A  2400W  (resistive)

3. Operating Temperature: 0°C ~ 70°C.

4. Store Temperature: -10°C ~ 50°C.

5. Temperature Control range: 1°C ~ 70°C;


     Measuring period: 10 S.

6. Function: Heating or Cooling.

7. Temperature Control:

      Control T = Set T (Heating)

      Control T = Set T+1°C (Cooling)

      T deviation from Control T to activate controlled unit:

             -1°C (Heating),

             +1°C (Cooling) 

Copy of Operating Manual:
Manual Supplement
View short setup video